Audi TCU Tune

Clutch adaptations should be performed after flashing on the following transmissions and setups:
– DL501 (with stock clutch on anything larger than factory turbos, or anytime an aftermarket clutch is fitted)
– DQ500 (ALL)
– ZF 8HP (any time swapping the mechatronic or with a built transmission)

In order to perform the clutch adaptations you can use a VCDS cable and software which can be purchased from Ross-Tech here: https://store.ross-tech.com/shop/vchv2_ent/
Another tool such as OBD11, other scan tool, or ODIS may also work, but we only offer official support for VCDS. This diagnostic cable is not included with purchase.

For flashing the TCU we have a few options:
– B8/C7 DL501: Can only be flashed with our TCU cable*
– C7/D4 ZF 8HP: Can only be flashed with our TCU cable*
– 8V/8S RS3/TT-RS: Can be flashed with our TCU cable* or TUNEIT software which flashes with DS1 (Discounted TUNEIT software license is included with purchase)
– B9/C8/D5 ZF 8HP: Can be flashed with our TCU cable* or DEADBEEF software which flashes with an ethernet to OBD cable (DEADBEEF software license is not included with purchase, OBD-ENET cable is not included with purchase)

*Our TCU cable is the same as many other companies use and has an OBD2 connector and a black plastic housing with an LED. If you think you have one, then please email us to verify first.